CR100 Manual Override Crank Handle
In the event of a power failure a manual override facility is recommended for the main entrance of a building. The crank handle facilitates the manual winding of the shutter into the raised position.
EYO100 Manual Override Eye Outlet
The shaft inserts into the motor through a 10mm hole in the wall, enabling the shutter to be raised with the manual override crank handle.
UNI100 - Universal Manual Override outlet
The universal outlet provides a permanent manual override eyelet that is fastened to the wall.
BB100 - Battery Backup
200mm x 160mm x 450mm (h x w x d)
Battery backup for larger shutters – a battery backup solution will be recommended in order to enable entry to the building during a power failure
FAI 100 Fire Alarm Interface Panel
181mm x 140mm x 80mm (h x w x d)
The Fire alarm interface is required in order to raise a shutter in the event of a fire, a health and safety requirement for every shutter over a fire exit.
AV100 - Audio Vision Panel
240mm x 230mm x 120mm (h x w x d)
Available on the Charter-Integr8 180FR Fire Shutter, the audio vision panel flashes and emits a sound when the fire shutter descends in the event of a fire, to warn personnel within the near vicinity.
MOBX100 - Manual Override Lockable Box
215mm x 70mm x 67mm (h x w x d)
Used to protect the Universal Manuel Override Eye Outlet in external applications, can be powder coated to any RAL colour, to suit building design.
MOLK100 - Key Locking Device for Manual Overrides
Facia Size: 62mm x 28mm (h x w)
Used as a key locking device to manual override systems, typically on 180C external hoodboxes. Supplied in silver with two keys.
KSBX100 - Lockable Key Switch Box
Used to protect the universal manual override eye outlet in external applications can be powder coated to any RAL colour to suit building design.
RE4 - 4 Motor Group Controller
490mm x 115mm x 44mm (h x w x d)
In order to operate up to 4 shutters from a single key switch a ‘4 Motor Group Controller’ would be required.